Dispersing Resins For Pigment Concentrate
Defoamers
Slip and Levelling Agents
High Molecular Weight Dispersing Agents
Conventional Wetting and Dispersing Agents
Other Miscellaneous Products
Additives For Composites, SMC, BMC
Specials
Automotive Coatings
Wood and Furniture Coatings
Adhesives and Sealants
Universal Colorants
Flooring coatings
Architectural Coatings
Composite material
Coil Coatings
General industrial Coatings
UV Coatings
Power and Electrical
Defoamers
Dispersing Technology
Slip & Leveling agent
Slide left and right to view
Aqueous
AFCONA-2501 is a mineral oil based defoamer containing small amount of silicone to give better deaeration. AFCONA-2501 is special suitable for all kind of water-based coatings from decorative paint to water-based printing ink. Due to its composition is mainly mineral oil, it is only suitable for preparation of base coating where high shear force is not applied for long time.
AFCONA-2502 is a defoamer modified with polysiloxane and cotaining hydrophobic particle for water-based system. It is suitable for normal water-based system, such as coating and ink, as well as for preparation of pigment pastes. Due to its very resistance to shear force and temperature, therefore it is also suitable for pigment concentrates and other high filled and high solid content system.
AFCONA-2503 is a defoamer for water-based system. It is mainly for the preparation of pigment concentrates. Comparing to AFCONA-2502, it gives less crater sensitivity and improves levelling.
AFCONA-2508 is a water-based defoamer based on polyether modified polydimethylsiloxane. It has good anti-foam and defoaming performance, can eliminate the bubble during the application of airless spraying and conventional compressed air spraying.
AFCONA-2524 is a water-based defoamer especially designed for PU dispersion system. It has very good defoaming performance, as well as good levelling and anti-crater properties. It is based on modified polysiloxane, and very easy to incorporate into system even under very low shear force.
Universal slip and levelling agent for all solvent- and water-based systems. Very effective against Benard cells and good anti-crater property in PU. Moderate slip.
Fluorocarbon modified polysiloxane with strong surface tension reduction, which results in excellent anti-crater property, substrate wetting and improved vertical levelling properties. Suitable for solvent- and water-based systems.
Short chain polysiloxane without intercoat adhesion problems in many coating systems. Very strong anti-crater property. Need to be combined with suitable defoamer. Recommended for electrodeposition coatings and all other water-based systems.
Substrate wetting and leveling agent for water-based system. It can eliminate crater and help waterborne film spread on the substrate with low surface tension, such as plastic substrate.
Silicon modified levelling agent with comblike sturcture. Reduces surface tension rapidly. Excellent anti-crater property without intercoat adhesion problem.
AFCONA-3590 is a fluorocarbon modified polysiloxane leveling agent designed with special sturcture. It can quickly reduce the surface tension and improve the performance of substrate wetting, as well as excellent anti-crater property. It gives no influence on intercoat adhesion.
40% solid content version of AFCONA-4550. Water-based PH independent dispersant for all kind of pigments. Cab be used as an effective dispersant in formulation of resin free pigment concentrates.
AFCONA-4595 is an improved version of AFCONA-4560. It has better viscosity reduction for pigments especially carbon black. Also can be used as a higher effective dispersant in the preparation of pigment concentrates.
Solvent-borne
Very strong defoamer and deaerator. Suitable for all solvent-based systems, special based on NC, Acid curing, epoxy and UPE.
AFCONA-2024 gives quick defoaming and anti-foaming effect in solvent-based systems, also shows self-levelling effect. Due to its lower polar, AFCONA-2024 shows very good anti-foaming and defoaming performance in the systems from medium to high polar.
Universal defoamer for all systems from low to high polar. Moderate performance, well balanced between defoaming and compatibility.
The most compatible defoamer in AFCONA products, recommended for clear coating. Excellent performance in PU,epoxy, UV and UPE. Widely used in refinish top coatings, UV and wood coatings.
Same family as AFCONA-2035, with levelling properties. Recommended to test it next to AFCONA-2035 because they have different performance.
A defoamer with good compatibility and excellent defoaming performance. Particularly suitable for the systems from medium to high polar,such as PU, epoxy, TPA and UPE.
Mainly used in UPE, epoxy, polyester baking and UV coating, also suitable for coil coating and can coating.
An improved version of AFCONA-2720 for UPE. It gives better transparency and defoaming performance.
High slip agent with oily feeling for solvent-based coatings. The oily effect enhance the film build. Suitable for metal coatings, refinish and baking paints. Low inner bubble sensitivity in PU coatings.
Fluorocarbon modified polysiloxane with strong surface tension reduction, which results in excellent anti-crater property, substrate wetting and improved vertical levelling properties. Suitable for solvent- and water-based systems.
Supplied in 100% active ingredient. Soluble in water, water-alcohol mixtures and other solvents. Act as universal slip and levelling agent for water- and solvent- based systems. Main properties are anti-crater, providing slip performance and anti-Bernard cells.
Polysiloxane modified with alkyl groups. Better defoaming properties than AFCONA-3236 in polar systems, Less slip and more serious in-can haziness than AFCONA-3236. Suitable for foam sensitive system, such as, solvent free PU and epoxy. Improves orientation of matting agent in UV coating.
Improved version of AFCONA3777. Based on the same chemistry but with better anti-crater performance. Suitable for all solvent-based systems.
AFCONA-3758 is mainly developed to replace fluorocarbon modified levelling agent. It gives good levelling and anti-crater performance.
Universal polyacrylate levelling agent with wide applicability and most moderate performance.
Polyacrylic levelling agent designed for polyester, UPE and epoxy systems with more compatibility and less in foam stability.
A high solid content dispersant with supply form of 65% solid. It has wide compatibility. AFCONA 4000 shows excellent performance especially in those systems which old genernation of products can't compatible with, such as TPA, NC, CAB and other less compatible resins.
Good compatibility and cheap price. Mainly used in the preparation of pigment concentrates. Also used in normal grinding process, especially for inorganic pigments and transparent iron oxide.
AFCONA-4011 is an improved version of AFCONA-4010. It has better costing performance. AFCONA-4011 is a polymeric dispersant especially developed for stabilizing inorganic pigments, such as titanium dioxide, iron oxide and matting agent. Due to its good compatibility with almost all of resins in coating, AFCONA-4011 can be used in almost all of solvent-based coating systems.
AFCONA-4063 is a PU dispersant with excellent compatibility and viscosity reduction. Used as main dispersant for all solvent- based system and universal concentrates.
High molecular weight dispersant bsed on the technology of AFCONA-4071. Designed for general industrial coating. Has very good deflocculation for organic red and violet. Also universally used for all carbon black and organic pigments.
AFCONA-4201 has the same structure as AFCONA4200. However, its polymer chain is longer, which provide better steric hindrance. Thus, it shows stronger pigment stability, color development and high gloss. Due to its better compatibility in TPA system, AFCONA-4200 performance is better.
Co-polymeic wetting agent. Used as an universal wetting and dispersing agent for industrial coating systems with high costing performance.
An universal dispersant for all solvent-based systems. Can be used in preparation of bentonite gel.
Higher polarity than AFCONA-5044. Suitable for the systems from low to medium polarity. Can cause yellowing in NC. In most condition, recommended for bentonite gel preparation.
Silicone free version of AFCONA-5065 without foam stabilizing effect. Stronger in anti-settling properties.
Slide left and right to view
© Copyright 2021 - AFCONA POLYMERS Co., Ltd. ALL RIGHTS RESERVERD
|苏ICP备19042627号|苏公网安备 32068402000156号
Supported by Thinkat
|Privacy|Legal
关注微信公众号
下载APP(安卓)
下载APP(IOS)
APP